Single Cylinder

IW-45M

The IW-45M has four standard stations, capable of a wide range of applications. The punching station can be converted into a notching station. IW-45M is heavier and stronger than other competitive machines. This durable and economical model is perfect for small shops with a limited budget.


Model IW-45M IW-50A IW-60H
Punching      
Punching Pressure 45 Ton 50 Ton 60 Ton
Punch Capacity ø22 x 15 ø20 x 18 ø28 x 15
(Diameter x Thickness) ø40 x 8 ø40 x 9 ø40 x 11
Throat Depth 175 180 220
Max. Stroke Length 35 42 55
Cycles / Min. (15mm stroke) 31 24 29
Working Height Up to Die 970 840 1000
Angle Shearing      
At 90° Shearing 80 x 80 x 8 100 x 100 x 10 100 x 100 x 13
At 45° Miter Shearing 50 x 50 x 6 65 x 65 x 8 80 x 80 x 8
Working Height 1120 850 1236
Flat Shearing      
Flat Bar Shearing 350 x 8 300 x 12 350 x 15
(Width x Thickness) 180 x 12 200 x 18 210 x 20
Blade Length 360 310 360
Angle Flange Trim 75 100 100
Working Height 970 1150 1006
Bar Shearing      
Round Bar Shear ø25 ø32 ø40
Square Bar Shear 25 x 25 30 x 30 38 x 38
Channel Shear - 76* 102*
I Beam Shear - 76* 102*
Working Height 1190 880 1260
Notching      
Rectangular Notcher (W x D x T) 50.8 x 90 x7** 50.8 x 90 x 7 50.8 x 90 x 8
Vee-Notcher (Side x Side x T) 90 x 90 x 8* 90 x 90 x 8* 90 x 90 x 10*
Working Height - 1150 1006

* : Optional Tooling

** : On IW-45M the notcher is optional tooling to be installed at the punching station.

Note: Based on low carbon / mild steel material strength of 45kg / mm² tensile. Design and specifications subject to change without notice. A 1-hole die holder and a 2-piece gauging table are provided as standard equipment on all single cylinder models.


Large Vee-Notcher (Side x Side x T) 160 x 6* 160 x 10* 160 x 8*
Multi Vee Press Brake (W x T) - 250 x 6* -
Angle Bending 65 x 8* 65 x 8* 65 x 10*
Pipe Notching - ø60* -

* : Optional Tooling

** : On IW-45M the notcher is optional tooling to be installed at the punching station.

Note: Based on low carbon / mild steel material strength of 45kg / mm² tensile. Design and specifications subject to change without notice. A 1-hole die holder and a 2-piece gauging table are provided as standard equipment on all single cylinder models.


Model IW-45M IW-50A IW-60H
Electric Power (HP) 5 HP 5 HP 7.5 HP
Net Weight (Apr.) 830 kg 1130 kg 1500 kg
Gross Weight (Apr.) 930 kg 1250 kg 1650 kg
Machine Dimension (Apr.) (L x W x H) 1260 x 700 x 1350 1310 x 770 x 1450 1460 x 770 x 1560
Packing Dimension (Apr.) (L x W x H) 1530 x 860 x 1630 1580 x 930 x 1730 1730 x 930 x 1840