 |
 The IW-50A features a vertical moving ram at the punching station for improved punching performance, and enables the use of optional tooling such as pipe notching and bending tools. The square/ round bar shear is a stand-along station with possibility of optional channel shear and section bar shear tooling. This model also features lower angle shearing and bar shearing stations. |
| Punching Pressure | 50 Ton |
| Punch Capacity | ø20 x 18 |
| (Diameter x Thickness) | ø40 x 9 |
| Throat Depth | 180 |
| Max. Stroke Length | 42 |
| Cycles / Min. (15mm stroke) | 24 |
| Working Height Up to Die | 840 |
| Flat Bar Shearing | 300 x 12 |
| (Width x Thickness) | 200 x 18 |
| Blade Length | 310 |
| Angle Flange Trim | 100 |
| Working Height | 1150 |
| At 90o Shearing | 100 x 100 x 10 |
| At 45o Miter Shearing | 65 x 65 x 8 |
| Working Height | 850 |
| Round Bar Shear | ø32 |
| Square Bar Shear | 30 x 30 |
| Channel Shear | 76* |
| I Beam Shear | 76* |
| Working Height | 880 |
| Rectangular Notcher (WxDxT) | 50.8 x 90 x 7 |
| Vee-Notcher (Side x Side x T) | 90 x 90 x 8* |
| Woking Height | 1150 |
| Single Vee Press Brake (W x T) | 160 x 10* |
| Multi Vee Press Brake (W x T) | 250 x 6* |
| Angle Bending | 65 x 8* |
| Pipe Notching | ø63 |
| Electric Power (HP) | 5 HP |
| Net Weight (Apr.) | 1130 kg |
| Gross Weight (Apr.) | 1250 kg |
| Machine Dimension (Apr.) (L x W x H) | 1310x770x1450 |
| Packing Dimension (Apr.) (L x W x H) | 1580x930x1730 |
Unit: mm
*:optional tooling.
Based on material strength of 45kg/mm2 tensile.
Design and specifications subject to change without notice.
*:optional tooling.
Based on material strength of 45kg/mm2 tensile.
Design and specifications subject to change without notice.
